Documentation · Overview
Supported devices and connections
Contents
What kinds of devices can be connected
Photovoltaic (PV) systems, heat pumps, battery storage, EV charging stations, consumption meters and the DT1Next system.
Supported manufacturers
| Connection | Devices |
|---|---|
| Native | Sunnycold Airsun SC (PV), Airsun HY/HW (heat pumps), Airsun Master |
| Native via PLC | Tecomat Foxtrot, series 2000 / CP2979 – see the example of connecting a Tecomat PLC over MQTT |
| Via Modbus TCP, MQTT or API | Victron Energy, Solax, Huawei, SolarEdge, Sigen, Deye, Sermatec |
| Your own device over MQTT | devices with an ESP32 microcontroller – see the example and help with integration; onlineWatt can supply ready-made labels with the serial number and registration token |
Other devices can be connected via Modbus TCP, MQTT or API. A specific type always needs to be checked in advance – send the manufacturer and type to info@onlinewatt.com.
How a device communicates with the portal
- The device sends data encrypted, over MQTT 5.0 with SSL/TLS or over HTTPS.
- Regular metrics arrive every minute; for heat pumps, electricity consumption, heat output and temperatures are in hourly data.
- Communication is two-way: for devices that allow it, settings can be changed from the portal.
- A device is registered in the portal with the serial number and registration token from its rating label, so no unknown device can connect. The procedure is in the guide Adding a site and a device.
Requirements
- The device must be permanently connected to the internet. Without a connection the values in the portal do not refresh and instructions from the portal are not carried out.
- The number of devices in one account is set by the tariff – see Tariffs and subscription.
Limits
- The range of data and of remote control differs between manufacturers and types; you can control only what the device and its manufacturer allow.
- A manufacturer on the list does not mean that every one of its models is supported.
- The MQTT and HTTP interface for manufacturers is described on the page Connecting devices: MQTT and HTTP API. A description of connecting over Modbus TCP is available on request at info@onlinewatt.com.
- New device types are created in the portal by their manufacturer in agreement with onlineWatt – see The portal for device manufacturers.
← All documentation · Found a mistake or missing something? Write to info@onlinewatt.com.