Documentation · Step-by-step guides

Adding a site and a device

Last change: Text version 1.2 of 17 November 2026Česká verze

For whom: end customers (installation companies add devices differently – see The portal for installation companies)
Time needed: about 3 minutes
You need: an account in the portal, the device's serial number and registration token – both are on the device's rating label
Where in the portal: Devices → site card → Register device → Serial number, Token → Register device

Did an installation company invite you to the portal? Then your site and device are already prepared and you do not need this guide. You can rename the site and move the device; nothing changes in the installation company's records.

Steps

1. Open Devices

In the main menu click Devices. Devices are grouped by site here, for example a house and a cottage.

2. Add a site

If you do not have the site yet, click Add place at the top right, fill in Name (for example Cottage) and click Confirm. You can rename the site later with the three-dot menu at the site card and Edit (window Edit place). In the same menu, Set as default site chooses the site shown after login.

3. Click Register device

At the site card click Register device. An empty site has the same button in the middle of the card, under the text "Register your first device."

4. Fill in the serial number and token

The window Register device opens. Type the device's serial number into Serial number and the registration token into Token – both are on the device's rating label; both fields are required. Then click Register device.

5. Check the device

The device appears in the site card. Values start to show as soon as the device sends its first data.

Good to know

  • One site can hold at most one PV system and one heat pump. When a site is full, the Register device button is grey; add a new site for another device.
  • A site can be deleted only when it holds no device.
  • Move a device to another site with the three dots at the device and Move; remove it from the account with Unregister.
  • The number of devices in the account is set by the tariff: Tariffs and subscription.
  • Which devices can be connected: Supported devices and connections.

When something does not work

  • The Register device button is grey → the site already has a PV system and a heat pump; add another site with Add place.
  • Registration fails → check the serial number and token for typos.
  • You do not have the registration token → the token is on the device's rating label together with the serial number. Cannot find the label or it is unreadable? Contact your installation company or write to info@onlinewatt.com.
  • The device is added but shows zeros → check that the device is switched on and connected to the internet.

← All documentation · Found a mistake or missing something? Write to info@onlinewatt.com.