Documentation · Step-by-step guides

Charts and data export

Last change: Text version 1.2 of 13 November 2026Česká verze

For whom: customers who want to see how production and consumption develop
Time needed: about 5 minutes
You need: an account in the portal with at least one device
Where in the portal: Devices → click the device → tab Data → Metrics for the selected time period; export: Export metrics at the top right

Steps

1. A quick look on the Dashboard

On the Dashboard choose the site at the top (for example Home). Live values are on the left, charts of the individual devices on the right. Switch the period with 24h, Week, Month and Lifetime above the chart.

2. Open the device detail

In Devices click the device name. The Data part opens with current values. For PV these are production, distribution grid, consumption and battery; for a heat pump the outdoor unit, bivalent source, inside unit, tanks and heating. On a phone you switch between Data, Events, Tickets and Instructions with a drop-down list under the heading.

3. Set up the line chart

Below the current values is the part Metrics for the selected time period. In Date until choose the day the chart should end with, and next to it the length of the period: 1 day, 2 days or 5 days. The line chart shows power over time.

4. Switch to the bar chart

The Line chart / Bar chart switch changes to a bar chart with energy totals in kWh. Choose the period with 24h, Month, Year and Lifetime.

5. Choose the quantities

Clicking the name of a quantity in the legend above the chart hides it or shows it again; a hidden quantity is struck through.

6. Zoom into a section

The line chart can be zoomed. Reset zoom returns to the original view.

7. Download the chart or the data

Download at the chart saves the chart with its legend as a JPG image. Download the measured values with Export metrics at the top of the device detail: choose the date in the calendar and click Confirm. An Excel file (.xlsx) is downloaded with the values of the chosen day by minute, one metric per column.

8. Export the energy overview

In Devices click Export energy overview at the top. Choose the Period (Month by days, Year by months, or Lifetime by years), the Year, if needed the Month, and the sites or devices. Click Confirm. An Excel file (.xlsx) is downloaded with tables of consumption from the distribution grid, PV production and feed-in to the distribution grid in kWh for the individual periods, and a table of EnPI indicators, i.e. values per person and per square metre for comparing sites; each site has its own row.

9. All current values

Below the chart are all current values of the device, for example battery voltage and current, power per phase, temperatures and software version. Click the eye icon at a value to see a small chart of its history. At the bottom is the time of the latest data.

Good to know

  • The data density in line charts (5 minutes or 1 minute), the per-phase view, the length of history, the detail of bar charts and which exports you have are set by the tariff: Tariffs and subscription.
  • Data is always collected, even when your tariff does not show it. After upgrading you also see older data within the range of the new tariff.

When something does not work

  • The chart is empty → check the chosen date and whether the device was sending data at that time.
  • You do not see older data or an export is missing → check what your tariff includes.
  • Nothing helped? Write to info@onlinewatt.com.

← All documentation · Found a mistake or missing something? Write to info@onlinewatt.com.